5G CPE high-performance quad-core processor high-speed Wi-Fi6 technology guarantees worry-free network coverage

Jrepus 5G CPE is equipped with high-performance quad-core processor and high-speed Wi-Fi6 technology to ensure worry-free network coverage. It is suitable for rapid deployment of wired broadband networks, Wi-Fi hotspots, home or commercial scenarios, etc. Realize fast and flexible networking in multiple scenarios such as office/shop/rental/exhibition/education/RV travel. Let the excitement be within reach.

The annual Black Friday is followed by the law of true fragrance of users after superimposing discounts on various products. Not only individuals, but many companies will also purchase office equipment and smart appliances during Black Friday. Among them, the upgrade of hard-core equipment in office scenarios such as routers is also a top priority. Especially for financial and live broadcast venues with high network requirements.

Therefore, how to choose a cost-effective router for Black Friday, consider the following aspects:  

1. Selection Guide

Wi-Fi6 has popularized mobile terminals

This should be the primary hard indicator for choosing a router in 2023.

◆Support Wi-Fi6

Wi-Fi6 is the sixth generation of wireless network technology. As the latest Wi-Fi technology, the Wi-Fi6 standard was launched at the end of 2019. After two years of development and improvement, the maximum transmission rate of Wi-Fi6 is 3.5% higher than that of Wi-Fi 5. Gbps, increased to 9.6Gbps, an increase of nearly 3 times. At the same time, Wi-Fi6 allows communication with up to 8 devices, covering 2.4GHZ and 5GHz, fully covering low-speed and high-speed devices; in terms of wireless speed, multi-terminal load, and low latency, Wi-Fi6 ishas its own advantages.

◆Processor (CPU)  

A router is like a computer, it needs to receive and forward data constantly, it runs 24 hours a day, and even if there are many connected devices, it will freeze. The performance of the processor directly affects the smoothness and responsiveness of the router. Therefore, the processor should try to choose more than four cores. Most high-end routers can view these parameters.

Routers are used in data transmission scenarios

◆Support dual-band/tri-band  

Single-band is a router with only 2.4G frequency band, and dual-band is a 5G frequency band added to 2.4G. 2.4G is better than 5G in terms of penetration, and 5G's transmission speed is better than 2.4G, and it can transmit more information. For large offices, shopping malls, airports and other public places, it is recommended to purchase a dual-band router (both 2.4G and 5G are supported).  

◆ Heat Dissipation  

When purchasing, you should also pay attention to heat dissipation, because the router is powered on 24 hours a day, and the heat is not small, especially in summer, the temperature is relatively high, and high temperature is the enemy of stable operation. Some high-end routers generate more heat and heat up faster.

The price range of router products is relatively large. When purchasing a router, we need to clarify the needs, budget, room area, and the megabytes of broadband for our own use, and then compare the parameter selection.

If you already have a router, but the local coverage is not good, you can try a commercial CPE solution, such as Jrepus' 5G commercial CPE JNR300, without replacing the current router, to achieve low-cost local space wireless expansion. It is suitable for some spaces or places where routers are not suitable for installation.

2. Jrepus 5G commercial CPE JNR300

  5G commercial CPE guarantees worry-free network coverage

 

Jrepus 5G commercial CPE JNR300 has a beautiful and compact appearance, with 6 built-in cellular antennas and a ring-shaped unobstructed layout to ensure 360-degree signal capture without dead ends.

 

 

5G commercial CPE adopts quad-core processor

 

Adopt high-performance quad-core processor and the latest high-speed Wi-Fi6 technology, support NR (SA&NSA), TDD-LTE, FDD-LTE, convert cellular network data into Wi-Fi and wired network port data.

 

 

Compatible with Wi-Fi6 standard 

 

 Jrepus series products have always been relatively generous in port configuration. JNR300 supports 1G LAN port, one 2.5G WAN/LAN port, and 2.4G+5G dual-band Wi-Fi-AP.

 

 

 

5G commercial CPE realizes efficient heat dissipation

 

At the same time, the JNR300 itself uses high-conductivity materials to dissipate heat, with a streamlined design and a chimney design on the top. The fan convection greatly improves the heat dissipation effect, and it can also ensure stable operation for a long time at high speed.

  

5G commercial CPE is compact and portable

 

High appearance and strong performance are also important reasons why many people choose JNR300.

 

 

 

 

5G commercial CPE configuration network self-recovery function 

 

The network self-recovery function of 5G commercial CPE can also ensure that the product is plug-and-play. The background detects and automatically repairs network problems in real time, without manual restart or reconfiguration of the network, making Internet access easier without manual intervention.

 

5G commercial CPE multi-scenario application

 

It is suitable for home or commercial scenarios that require rapid deployment of wired broadband networks, Wi-Fi hotspots, etc. Realize fast and flexible networking in multiple scenarios such as office/shop/rental/exhibition/education/RV travel.